But I have 2 questions:
• I do not understand how close orders, as in the properties of the strategy is all disabled and as an indicator to chusura use only the TP
• The Monte Carlo analysis is dramatic.

Do you also have the same result?
Do you have suggestions to improve it?

Are you sure your lot size is 100000.
Check the Control Panel -> Symbols page and select the correct data source and symbol.

No, everyone was 10,000.: /
That's because I'm still not a millionaire!   

Thank you

then a trade from 21,000 is correct, but 21,500 is not correct.
How come I have lots of strange.

I am creating this strategy,
Use the FBP data, default 5 digits

Opening percentage 2%
maximum 2 lots

the newspaper reports all transactions to 20,000 with both an equity from 2,000 to 10,000 €
2 lotts should be € 200,000

If you change the settings by placing a lott of 5.0, changing the results with trade between 20,000 to 50,000
it is as if the lots was 10,000 instead of 100,000

I simply need to change the "position maximum amount" to have what I try, but I would not be sure which lot opens in mt4. Even after a demo, I doubt that the EA can open crazy exaggerated lots.

What should I do ?
Thanks, as always.

I have 3 different Broker:
Afx: GMT + 2, http://it.tradingt.com/supertradingonlinesto/
Octafx: GMT + 2, http://it.tradingt.com/octafx/
Swissquote: GMT + 2, http://it.tradingt.com/swissquote-bank/

Swissquote would my schedule GMT.
installed the script to download the history of candles, I FBP connected directly to the Files folder of each Mt4, well, now:
I have to update the data with my GMT time?
I do not change the data brokers?
FBP in the system for changing the GMT information is only in the History tab center> Download.

Thank you

Actually changing indicator disappear ambiguous bars.

thank you

All I have with ambiguous reporting of candles , even with the default data of FBP .
I redid the many times imports , changing different things , even the brokers and mt4 , but I can not come at the head

The Strategy doesn't determine a correct entry signal.
The ATR indicator is satisfied in both directions simultaneously. It rises Buy and Sell signal for the same bar. This is a good example of an ambiguous signal and it explains why the strategy doesn't trade.

See this article for more details: http://forexsb.com/wiki/fsbpro_guide/op … _condition

Now I'm still stuck with the ' Import data from different platforms MT4

All I have with ambiguous reporting of candles , even with the default data of FBP .
I redid the many times imports , changing different things , even the brokers and mt4 , but I can not come at the head .

I also made the comparison between the graph of FBP and that of Mt4 , and I see them equal .

The result is so different that a strategy with UsdJpy with FBP data made € 12,000 with those of Swissquote makes -2.000 .

What is the cause ?
What gets in these cases ?

Thank you

Meanwhile, are grappling with this Cross , does not want to go under the Profit Factor 2.0.
I also used the auto-builder, but there's no way.

[Opening Point of the Position]
     Bar Opening
     Enter the market at the beginning of the bar
     Base price  -  Open

[Opening Logic Condition]
     Ichimoku Kinko Hyo
     [ A ]   The position opens above Kumo
     Tenkan  -  9
     Kijun  -  26
     Senkou Span B  -  52
     Use previous bar value  -  Yes

[Opening Logic Condition]
     RSI
     [ A ]   RSI is higher than the Level line
     Smoothing method  -  Smoothed
     Base price  -  Close
     Smoothing period  -  14
     Level  -  50
     Use previous bar value  -  Yes

[Opening Logic Condition]
     Fisher Transform
     [ A ]   Fisher Transform is higher than the zero line
     Base price  -  Median
     Period  -  10
     Use previous bar value  -  Yes

[Opening Logic Condition]
     Fisher Transform
     [ A ]   Fisher Transform is higher than the zero line
     Base price  -  Median
     Period  -  10
     LTF  -  H1
     Use previous bar value  -  Yes