But, if I switched it off, I can't produce strategy with very good equity curve, as in the case with FSB "filter non-linear" balance optimizer..

So, the BOTTOM LINE, how's the right way to use the filter non-linear balance pattern in FSB pro??

thanks for the answer

At that time I stopped using FSB as results may be different.

Sometimes the FSB pro screen also gone blank (all white screen, nothing on it). .

How much RAM you have on your computer? Is you Windows 32 or 64 bits?

FSB Pro keeps the loaded data files in the computer memory for faster reuse. You can release unused files from the History Center.

I think that 32 bit Windows manages maximum 3.3-3.5GB  Ram.
On full load FSB Pro goes to 3-4 GB on my machine. ( 8 GB ram, 64bit Win 8.1 )

I don't know how, but my FSB pro optimizer always produce different results than my FSB

Both programs has different optimization algorithms. FSB optimizer uses more "brute force" and some time finds higher stats. FSB Pro optimizer is more elegant and much more faster.

Acceptance Criteria parameter "Filter none-liner balance pattern" in FSB Pro is much more advanced.
The free version checks only separate points (1 in your case), the Pro version checks the whole line.
The way you set "Filter none-liner balance pattern" is near to useless. It would check if only 1 point (the middle of the chart) differs with 20% of the straight line from the start to the end of the balance chart.
FSB Pro will not except a chart even if only one point of the line goes beyond 20%. What I see from the chart, your initial balance line is far from 20% and goes to the negative area. You have probably switched of the "Trade until Margin Call".

The Optimizer is not designed to make a loosing strategy profitable or to manage a strategy that do not complies with the Acceptance Criteria.

Have you tried with switched off the Acceptance Criteria?

FSB strategy

FSB Optimizer Parameter

FSB Optimizer Criteria

FSB Results

FSB pro strategy

FSB pro paramater

FSB pro criteria

FSB pro results

as u can see.. This is always the case with me. . I don't know how, but my FSB pro optimizer always produce different results than my FSB (mostly not produce anything). . this is very frustating. . Sometimes the FSB pro screen also gone blank (all white screen, nothing on it). .

as u all can see I use exactly the same criteria, parameter, and logic. . but the results is different. .

Send the file to him?? you mean send my FSB pro program to him??

In order to inspect the case where a strategy cannot be optimized in FSB Pro I need your settings files and the strategy file.

Zip you "User Files \ Settings" folder and send it to me together with the strategy at info(at)forexsb.com.

or else post in here

Not much sense discussing sometrhing that Popov can not see for himself.

1. I use FSB pro optimizer and FSB optimizer simultaneously. .

2. at each program I simply use 2 Acceptance criteria such as Min trade = 200, and Max E. DD ($) = 70

3. Then the 2 program simply produce different results, If I uncheck the acceptance criteria, then I Cannot find the strategy that meet my criteria using FSB pro right??

Sometimes FSB pro window just become wipe out (nothing in the window whatsoever, then the message "FSB pro has stopped working" came).. T.T

I think the optimizer works well. Pandapika (btw I'm also a panda lover), you probably need to turn off the acceptance criteria in order to obtain what you want. Be careful not to over-optimize though.

I agree.

I find that I have to experiment a lot and check the settings carefully.