<![CDATA[Forex Software — connected-disconnected]]> https://forexsb.com/forum/topic/2045/connecteddisconnected/ Mon, 30 Jul 2012 07:47:35 +0000 PunBB <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/15615/#p15615 Hi, I have the problem when I run several instances on PC:s with less performance. If I put the FST:s  in a mode not showing the chart it looked like it was better, suggesting that the PC has too much to do in regards to its performance.

I never have the problem on High performance PC.

]]> Mon, 30 Jul 2012 07:47:35 +0000 https://forexsb.com/forum/post/15615/#p15615 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/14941/#p14941 I had the same problem with UCV cheaper server then I closed all unused charts, I minimized FST and the connection became stable using only one copy of FST.
I think there was not enougth memory or the server was overloaded. I'll upgrade my account...

]]> Tue, 12 Jun 2012 22:01:45 +0000 https://forexsb.com/forum/post/14941/#p14941 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/12583/#p12583 FYI there are known issues with the Oanda MT4 demo servers. Specifically, order delays exceeding 30 seconds are common. The problems do not exist (for the most part) on Oanda MT4 LIVE accounts. These delay problems are very apparent when attempting to trade manually. To an EA, the system appears stuck or will give a 'Trade Context Busy' error if the order instruction is resent.

I did some limited testing with FST and an Oanda demo account. During the frequent delays after an order is sent, FST will say 'disconnected' but eventually comes back. I believe these issues are due to Oandas problem.

I plan to use FST on 2 Oanda live accounts and will let you know if there are any major problems.

]]> Wed, 15 Feb 2012 02:22:17 +0000 https://forexsb.com/forum/post/12583/#p12583 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/12097/#p12097 Just wanted to report back with some updated experiences with this issue.

I'm currently running several instances of FST across several accounts. Although I'm still encountering this connected/disconnected issue, it hasn't up to now caused any trouble with slippage or trades being properly executed.

I still can't speak definitively to the cause of course or to the issue's potential negative effects, but at the moment it doesn't seem to be causing a problem in my case.

Will post back with any more significant info on the issue.

]]> Sat, 07 Jan 2012 23:24:46 +0000 https://forexsb.com/forum/post/12097/#p12097 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/11929/#p11929 I'm using MB Trading's MT4--Version 4.00, build 409.

I increased the memory available to the virtual machine for Windows in parallels, which seemed to work quite well all day. A little after 3:30 EST however the connect/disconnect issue started up again.

One thought I had is that it might be tied to overall market volume, perhaps the system could be struggling with the rapid changes. That's just a shot in the dark though, I'd have to check it out more closely before giving it any real consideration.

]]> Tue, 20 Dec 2011 21:14:50 +0000 https://forexsb.com/forum/post/11929/#p11929 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/11925/#p11925 Sam, what is the build of your MT?

]]> Tue, 20 Dec 2011 12:18:15 +0000 https://forexsb.com/forum/post/11925/#p11925 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/11915/#p11915 I'm having the same issue as fotlitbow above- Running a single instance of FST, getting connected/disconnected maybe 20 times each minute.

I run 32bit Windows 7, however it's run virtual (parallels) on a mac. So far I haven't had any Parallels/virtual machine related issues with FSB or FST.

Going to look at CPU/Memory and try to find out if the lack thereof is causing problems for MT-Although there don't seem to be any other overt functional issues with MT that would be caused by this.

Anyone else still having trouble? Any ideas or suggestions would be great.


26 >FST-MT4_Administrator-0<
25 >MT4-FST_Administrator-0<
24 >W32TIME_ALT<
23 >prl_SIAPipe<
22 >PIPE_EVENTROOT\CIMV2SCM EVENT PROVIDER<
21 >MsFteWds<
20 >Winsock2\CatalogChangeListener-1f0-0<
19 >Winsock2\CatalogChangeListener-1e8-0<
18 >srvsvc<
17 >trkwks<
16 >parallels_tools_pipe<
15 >keysvc<
14 >wkssvc<
13 >Winsock2\CatalogChangeListener-360-0<
12 >atsvc<
11 >Winsock2\CatalogChangeListener-300-0<
10 >eventlog<
09 >LSM_API_service<
08 >Winsock2\CatalogChangeListener-180-0<
07 >epmapper<
06 >Winsock2\CatalogChangeListener-2b0-0<
05 >plugplay<
04 >scerpc<
03 >ntsvcs<
02 >protected_storage<
01 >lsass<

]]> Mon, 19 Dec 2011 22:59:21 +0000 https://forexsb.com/forum/post/11915/#p11915 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/11654/#p11654 I cancelled my VPS service because I couldn't make FST work on VPS.

It was a Hyper-V VPS. I am not sure if this tech sucks.

]]> Tue, 29 Nov 2011 13:50:26 +0000 https://forexsb.com/forum/post/11654/#p11654 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/11558/#p11558 Same issue. I only run single instance of FST.

I have no problem on my local 64 bit Win7 or 32 bit XP. But when on VPS, I got it connected - disconnect from now and then. Then I tried to change magic number and connection ID (single instance but multi-mode is on), didn't help.

25 >MT4-FST_vps1111Admin-8423<
24 >FST-MT4_vps1111Admin-8423<
23 >Winsock2\CatalogChangeListener-380-0<
22 >PIPE_EVENTROOT\CIMV2SCM EVENT PROVIDER<
21 >Winsock2\CatalogChangeListener-1e8-0<
20 >Ctx_WinStation_API_service<
19 >TermSrv_API_service<
18 >Winsock2\CatalogChangeListener-1e0-0<
17 >W32TIME_ALT<
16 >keysvc<
15 >winreg<
14 >wkssvc<
13 >Winsock2\CatalogChangeListener-320-0<
12 >atsvc<
11 >Winsock2\CatalogChangeListener-2ec-0<
10 >eventlog<
09 >LSM_API_service<
08 >epmapper<
07 >Winsock2\CatalogChangeListener-188-0<
06 >Winsock2\CatalogChangeListener-29c-0<
05 >plugplay<
04 >protected_storage<
03 >scerpc<
02 >ntsvcs<
01 >lsass<

]]> Tue, 22 Nov 2011 00:44:29 +0000 https://forexsb.com/forum/post/11558/#p11558 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/11088/#p11088 I have the same issue here until today !

Have this problem solved ?

Then, if still happen, have you found the impact to live trading at MT ?

Is this also impact to trading with Daily chart ?
In my mind, trading within Daily chart only need to run this system at the time before and after the new Daily chart begin ! While we use open at new bar and close at the end of bar ! Right ?!

]]> Tue, 25 Oct 2011 03:15:53 +0000 https://forexsb.com/forum/post/11088/#p11088 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/10519/#p10519 hello to all,
i writing you to say that i have the same problem regarding connect and disconnect.
I am using a VPS Windows 2008 server 64 bit version with the last version of the software of Mr Popov.
But i have to to say that seems to happen with last version of FST.
do you need more info or a video?
bye for now
Luca - Italy

]]> Fri, 09 Sep 2011 17:45:02 +0000 https://forexsb.com/forum/post/10519/#p10519 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/10447/#p10447 wilson78 wrote:

Thank you Blaiserboy. Below is my laptop spec.

Processor = AMD Turion II P520 Dual-Core Processor 2.30 GHz
Installed RAM = 6.00GB
System type = 64-bit OS
Windows 7 Home Premium, Service Pack 1.

I'm running 5 copies of OANDA MT4 and 5 copies of FST. I've also had 2 copies of FSB running on Strategy Generator, which maxed out the CPU usage to 100%. Maybe I need few more PC's and Laptops ;-)

Thanks a lot.

Hmmm I wonder if you use CCCleaner on a regular basis to clean out the garbage, that is a long shot.

I try to keep my CPU and memory both under 80 (4 dual processors).

I still think the problem is metatrader.

]]> Wed, 07 Sep 2011 18:11:41 +0000 https://forexsb.com/forum/post/10447/#p10447 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/10444/#p10444 Why 5 MT's and 5 FST's? I think 1 MT, 5 charts and 5 FST's should be a better solution.

]]> Wed, 07 Sep 2011 15:08:41 +0000 https://forexsb.com/forum/post/10444/#p10444 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/10443/#p10443 If it is a Dual-Core Processor try to close one FSB. One core for FSB and other core for everything else.

]]> Wed, 07 Sep 2011 14:04:07 +0000 https://forexsb.com/forum/post/10443/#p10443 <![CDATA[Re: connected-disconnected]]> https://forexsb.com/forum/post/10442/#p10442 wilson78 wrote:

I'm running 5 copies of OANDA MT4 and 5 copies of FST. I've also had 2 copies of FSB running on Strategy Generator, which maxed out the CPU usage to 100%. Maybe I need few more PC's and Laptops ;-)

I think that the problem is in something else. I am using 19 instances of FST and 3 instances of MT4 in much lower-end hardware without any problems. I am using Windows XP x64.

]]> Wed, 07 Sep 2011 13:56:12 +0000 https://forexsb.com/forum/post/10442/#p10442