Yes when  i open it now, it says that the max is 200, but it still exports it with 400. Anyway when i change it to 199 it is ok. May be something wrong when the max value is entered.

Thank you

FSB Pro doesn't store parameters. All numbers are stored in the strategy files. The initial values and the limits comes from the indicators files.

as i wrote before i was having problem with exporting EA with the Moving Average. At that time i changed the max parameter so i can use bigger inputs. But i didnt find solutions, so i put it back to 200. May be there is something saved in the software that it can be more, but it is strange that i set it to 200 and it is actually 400.

the strategy came from the generator, with defoult inputs, then i added trend following indciators, on the same M1 chart = bigger parameters

The actual period is 400.

It should not be possible to set 400 because the MA period is limited between 1 and 200.

How did you get this strategy?

Do you use a modified indicators?

I have some strange issue. On the attached strategy i set Moving Average at 200. But when i go to the optimizer it shows 400. Also when i export it as an EA, it stays in the inputs as 400.

Even at that moment the EA is profitable, but i am not sure if it uses 200 or 400.

I attach the strategy and few pictures.

Hope someone can help me, how to solve that difference.