In my case, I have 5 digits for silver. Then the range allowed for the spread and for the indicator parameters should be automatically increased. Is this feasible?

Different treatment comes from differences between FX and CFD. You can't overcome or "eliminate" it,  if you know what I mean.

In principle, you can adjust digits in FSB. It affects FST trading in this respect, that you'll have to bear in mind the digits and adjust point values in indicators, if necessary.

There's another possibility - treat silver in FSB as FX, not CFD, just like your broker.

But that's what I already do, I consider it FX. Could you explain what's how FSB and FST treat differently  FX and CFDs?
In my view it would be easier to eliminate the limits. Would it be possible?

There's another possibility - treat silver in FSB as FX, not CFD, just like your broker.

Blaiserboy wrote:

nquental wrote:

Hi!
It's not the first time I have problems with the upper limits in certain parameters. Last time was with certain indicators, but now it was in the instrument editor. For silver, for example, my broker uses 5 digits. The spread is there around 3500 points, a value which I am unable to enter in the editor.
Any chance to get rid of these limits - or perhaps enforce laxer limits?
Cheers
N.

When I take the prices you provided.... seems the spread is not 3500 but 2500. I subtracted that bid from the ask to arrive at 2500.

Can you verify your numbers.....

And . did u set it up as CFD or Forex.......?

Ok but does it make any difference? Now it's 2500, at night it will be 3500...
Humm I don't remember if CFD or Forex, I'll check. Which influence does this choice have?

Please post a pic of the contract specs. FSB treats the CFD differently from the Forex...... we have to know how your broker treats this instrument

My broker is 2 digit and CFD as u will see in the pic

nquental wrote:

Hi!
It's not the first time I have problems with the upper limits in certain parameters. Last time was with certain indicators, but now it was in the instrument editor. For silver, for example, my broker uses 5 digits. The spread is there around 3500 points, a value which I am unable to enter in the editor.
Any chance to get rid of these limits - or perhaps enforce laxer limits?
Cheers
N.

When I take the prices you provided.... seems the spread is not 3500 but 2500. I subtracted that bid from the ask to arrive at 2500.

Can you verify your numbers.....

And . did u set it up as CFD or Forex.......?

Ok but does it make any difference? Now it's 2500, at night it will be 3500...
Humm I don't remember if CFD or Forex, I'll check. Which influence does this choice have?

Hi!
It's not the first time I have problems with the upper limits in certain parameters. Last time was with certain indicators, but now it was in the instrument editor. For silver, for example, my broker uses 5 digits. The spread is there around 3500 points, a value which I am unable to enter in the editor.
Any chance to get rid of these limits - or perhaps enforce laxer limits?
Cheers
N.

When I take the prices you provided.... seems the spread is not 3500 but 2500. I subtracted that bid from the ask to arrive at 2500.

Can you verify your numbers.....

And . did u set it up as CFD or Forex.......?  take a pic of the contract specs for your broker for that instrument and post it, please

Can you write or make screenshot of silver's bid/ask here, please? That would help I think.

Sure:
Bid: 22.28565
Ask: 22.31065

Thanks,
N.

If you want to help me, please explain your reasoning. I'm not blindly following you just because you say "believe me". If you don't want to do it it's fine for me as well.