I just increased the two to ten in
for (int iBar = Bars - 2; iBar > 0; iBar--)
to
for (int iBar = Bars - 10; iBar > 0; iBar--)
the drop off is much sooner
so it's likly it's your problem
i will see if i can help you later 
for (int iBar = Bars - 2; iBar > 0; iBar--)
to
for (int iBar = Bars - 10; iBar > 0; iBar--)
the drop off is much sooner
so it's likly it's your problem
i will see if i can help you later
Sorry for 3 consecutive posts, but apparently something is wrong with attachments.
Again, here is how it behaves: https://skitch.com/drogus/8nihe/windows … -1-running
And here is the code: http://drogomir.com/LaguerreFilter.cs
As you can see indicator is moved to the left comparing to the one in MetaTrader. I'm not also sure how to make 2 modes that are needed for using LaguerreFilter, which are: "price is lower than Laguerre filter" and "price is higher than Laguerre Filter".
Default parameters: Fixed minimum -0.05 Fixed Maximum 1.05
I found a source from my archive, threw it together following its lead, not sure if it's identical to yours, nevertheless the indi is attached, cross-referenced with MT->passed my test, values match. If you don't like my wording in the indi, do whatever you feel needs to be done - replace, change, etc.
Knock yourself out! 
PS: Don't be sorry for your posts, it's a forum!
]]>Again, here is how it behaves: https://skitch.com/drogus/8nihe/windows … -1-running
And here is the code: http://drogomir.com/LaguerreFilter.cs
As you can see indicator is moved to the left comparing to the one in MetaTrader. I'm not also sure how to make 2 modes that are needed for using LaguerreFilter, which are: "price is lower than Laguerre filter" and "price is higher than Laguerre Filter".
]]>It almost works 
The indicator itself is pretty similar to what I get in mt4, but the last bars are broken: https://skitch.com/drogus/8nihe/windowsxp-snapshot-1-running
Could you guys help me to figure out what's wrong? I've attached my version of the script. Some code is commented, I will get back to it when the indicator works.
]]>]]>It uses the same formula as in the shown Laguerre.mq4 and respectively the values are same.
To install the indicator put it in the Custom Indicators folder. When you start the program it will load the indicator alone. If the program is running, press Ctrl + I in order to reload the custom indicators.
]]>There is a very good indicator available - "Laguerre". Please could somebody will implement this indicator into the FST and FSB. It's really very good, please see my open positions:
Indicator itself (mq4) for download: http://www.mediafire.com/?db2m42gtor4
More information about the Laguerre:
http://www.scribd.com/doc/24590679/Time-Warp
http://forex-indicators.net/mt4-indicators/laguerre-rsi
The indicator should have this settings:
Laguerre rises
Laguerre falls
Laguerre is higher than the level line
Laguerre is lower than the level line
Laguerre crosses the level line upward
Laguerre crosses the level line downward
Laguerre changes its dorection upward
Laguerre changes its direction downward