<![CDATA[Forex Forum]]> 2010-03-11T17:41:05Z PunBB http://forexsb.com/forum/ <![CDATA[Error message]]> Hi Popov,

I got an error window when I wanted to use the EURUSD240.csv file. I imported it from my broker as usual, but this time a message telling "too high value for Int32". I'm importing data since I began to use FSB and this is thue first time it happens to me.

Any help?   sad

Thank you very much in advance.

]]> http://forexsb.com/forum/user/1670/ 2010-03-11T17:41:05Z http://forexsb.com/forum/topic/1425/error-message/new/posts/ <![CDATA[New Indicators: Higher Time Frame Indicators Set]]> Higher Time Frame Indicators is a collection of indicators that allows us to plot higher time frame indicators value to the current time frame. For an example: you can plot 1 week time frame of Accelerator Oscillator indicator on 1 day time frame chart or 1 hour time frame of William Percentage indicator on 5 minute time frame chart. So this indicator is very useful if you are going to build multi time frame or multi period strategy.

http://s4.postimage.org/o3CNS.jpg

First you have to select chart's time frame data, and then apply the HTF indicators and set the higher time frame reference as shown on the picture above. Primary option for HTF indicator are:
- Plot full HTF bar checkbox: which allow you to choose full bar data simulation or intra bar data.
- Use previous bar value: which allow you to choose previous bar value or latest bar value. As special note here: if you select the full bar data then previous bar value is a previous bar on the higher time frame, and if you select the intra bar data then previous bar value is previous bar on the chart's time frame.

Attached are the HTF Indicator Ver 3.0.0 which contains 39 original indicators such as: Accelerator Oscillator, William Percentage Range, CCI, ADX etc.

Rgds
Denny Imanuel
imanuel.denny@gmail.com

]]> http://forexsb.com/forum/user/1573/ 2010-03-11T14:07:08Z http://forexsb.com/forum/topic/1372/new-indicators-higher-time-frame-indicators-set/new/posts/ <![CDATA[Live signals 50 pips daily]]> Wednesday, 26 Aug 2009 - 5:30 AM GMT
EUR/USD
Trend:Downward
Sell EUR/USD at 1.4301 TP 1.4271
Resistances :1.4342 - 1.439
Supports : 1.4263 - 1.4233

GBP/USD
Trend: Downward
Sell GBP/USD at 1.6329 TP 1.6299
Resistances : 1.6503 - 1.66
Supports : 1.635 - 1.6294

USD/JPY
Trend: Upward
Buy USD/JPY at 94.23 TP 94.53
Resistances :94.89 - 95.38
Supports :94.1 - 93.79

USD/CHF
Trend: Upward
Buy USD/CHF at 1.0622 TP 1.0652
Resistances : 1.0645 -1.0672
Supports : 1.0576 - 1.0534

]]> http://forexsb.com/forum/user/1267/ 2010-03-11T11:32:58Z http://forexsb.com/forum/topic/997/live-signals-50-pips-daily/new/posts/ <![CDATA[OnlyFx - Signal Provider]]> I would like to introduce you to two of my accounts:

https://zulutrade.ru/TradeHistoryIndividual.aspx?pid=12147
Signals with big drawdown, but more profitable

https://zulutrade.ru/TradeHistoryIndividual.aspx?pid=13159
Signals with a small drawdown

look at the history of transactions, is not it good?

Also looking for investors for trust management. Discuss all the options - write personal messages.

]]> http://forexsb.com/forum/user/1748/ 2010-03-11T10:12:13Z http://forexsb.com/forum/topic/1429/onlyfx-signal-provider/new/posts/ <![CDATA[Some False results]]> First of all I wanna thank you for effort.

I tested some basic things (1 day TimeFrame EURUSD open price), that is with price move and with constant take profit and stop loss nothing more and on 100 results given around 10% are false where is profit it should be loss only one was opposite. All this was under pessimistic scenario and while checking i didn't find any reason that data could be interpet different just maybe in one case.

Note: I didn't test to much just 100 results

]]> http://forexsb.com/forum/user/1742/ 2010-03-11T10:01:49Z http://forexsb.com/forum/topic/1423/some-false-results/new/posts/ <![CDATA[Different Data in FSB & .CSV]]> I use FSB 2.12 & MetaTrader (Demo account) for export .CSV

I need to analyze my trading technique but I see there is difference in data .CSV
with data 'Account Statistic' in FSB.

The example, I start trading MetaTrader with 10000.
In 'Account Statistic' are written correctly that Initial Account its 10000 USD.
Account Balance in MetaTrader 16205 but in 'Account Statistic' FSB are only written 86.00 USD
and Balance without Charges are written 10052,00 USD.

Note in column 'Market Data' with transaction in MetaTrader also completely wrong.
I already updated .CSV & use M1 timeframe (EURUSD1.CSV)

Why its number so difference? or is it because that I didn't setting FSB correctly?

]]> http://forexsb.com/forum/user/1693/ 2010-03-11T08:03:13Z http://forexsb.com/forum/topic/1427/different-data-in-fsb-csv/new/posts/ <![CDATA[forex signals update daily - fonforex]]> Daily Signals 11/03/2010

EUR/USD
Sell at 1.3631 SL 1.3671 TP 1.3601

GBP/USD
Sell at 1.4954 SL 1.4994 TP 1.4924

USD/JPY

Buy at 90.43 SL 90.13 TP 90.73

USD/CHF
Buy at 1.0720 SL 1.0680 TP 1.0750

]]> http://forexsb.com/forum/user/1489/ 2010-03-11T07:43:29Z http://forexsb.com/forum/topic/1428/forex-signals-update-daily-fonforex/new/posts/ <![CDATA[Generic Error Report]]> See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Runtime.InteropServices.ExternalException: A generic error occurred in GDI+.
   at System.Drawing.Graphics.Clear(Color color)
   at Forex_Strategy_Trader.Chart.PnlPrice_Paint(Object sender, PaintEventArgs e)
   at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer, Boolean disposeEventArgs)
   at System.Windows.Forms.Control.WmPaint(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

continued in next message due to character limit.

]]> http://forexsb.com/forum/user/1745/ 2010-03-10T20:32:27Z http://forexsb.com/forum/topic/1426/generic-error-report/new/posts/ <![CDATA[Important Data Released from the US for Forex Traders by GoLearn Forex]]> The Dollar gained little ground today as it advanced versus its G-10 rivals.  DXY support at 74.90 held firmly again today as the index gained before closing at the 75.303 handle.  The EUR was pushed lower as ECB President Trichett applauded the Fed's Ben Bernanke's strong Dollar comments made day prior.

The Asian and London session saw traders take profits as they finished the day marginally lower following yesterday's rally.  Gold continues to make headlines as it closed up a $1 to 1,140.20 while Oil continues to consolidate just below $80.

There was a flurry of U.S economic data released today.  The 2 releases that will capture headlines are the PPI print which continues to show a lack of pressure on price.  The other release which surprised the analysts was the Net TIC Flows. Expectations were for $30 billion but the figure came in at $40.7 billion.   CPI's are set to print tomorrow in Canada and in the U.S.  In the U.K, BOE Meeting Minutes will be published.

Upcoming Forex Events for November 18, 2009

GBP    MPC Meeting Minutes
CAD    Core CPI (MoM)    Forecast  0.00%  Previous  0.30%
USD    Core CPI (MoM)    Forecast  0.10%  Previous  0.20%
USD    CPI (MoM)        Forecast  0.20%  Previous  0.20%

]]> http://forexsb.com/forum/user/1356/ 2010-03-10T16:57:10Z http://forexsb.com/forum/topic/1132/important-data-released-from-the-us-for-forex-traders-by-golearn-forex/new/posts/ <![CDATA[Tool to create EAs with risk and money management WITHOUT programming]]> EA Creator - tool to create flexible Expert Advisors with risk and money management without any programming.

More info: www.eacreator.com

]]> http://forexsb.com/forum/user/914/ 2010-03-09T19:21:36Z http://forexsb.com/forum/topic/809/tool-to-create-eas-with-risk-and-money-management-without-programming/new/posts/ <![CDATA[Various FOREX MetaTrader Expert Advisors]]> MetaTrader AutoOptimizer Forex Software Conception

AutoOptimizer is MetaTrader4 oriented forex software that makes it possible to optimize expert advisor or several expert advisors simultaneously in fully automated mode.

Many experienced traders know that expert advisors require re-optimization of the parameters from time to time. Even if the expert advisor shows a profit on the back test during a long period of history, it’s work can be improved by optimizing the parameters of a small range of deviations from the previously selected parameters over short time intervals. For example, many traders use moving averages (MA), always pick the parameters of fast and slow MA and StopLoss and TakeProfit, which enables more accurate to enter the market and find the exit point. Re – optimization problem is also very relevant for forex scalping systems. We have developed AutoOptimizer Tool to automate the process of optimization and re -optimization. You just need to select expert adviser(s), which you want to optimize, set start/step/stop values. Also you must specify month, day and time when the program will start the process of optimization (for example, every Saturday at 8 am), choose the best parameters of optimization and save them to .set file. Then the expert adviser(s) will trade with new parameters. This process is fully automated and requires no intervention by the trader. In fact, you get expert adviser, adapting to market conditions. AutoOptimizer will help you to use your expert advisors more effectively.

AutoOptimizer Forex Software Help:
AutoOptimizer Forex Software Installation and Usage
AutoOptimizer Trial version is available.EMAIL

]]> http://forexsb.com/forum/user/1089/ 2010-03-09T06:22:17Z http://forexsb.com/forum/topic/1187/various-forex-metatrader-expert-advisors/new/posts/ <![CDATA[New version upgrade]]> Dear visitors,

We are very proud to announce that, we've just release our new upgrade version system. This system is more than 5 years developing and now we’ve got a very high accuracy signals.

For now onwards the signals will be release with exact entry and exit points. This system can trades at short term, medium term and long term as well.

Happy trading!

http://fxdm.blogspot.com/

]]> http://forexsb.com/forum/user/672/ 2010-03-08T03:24:26Z http://forexsb.com/forum/topic/1422/new-version-upgrade/new/posts/ <![CDATA[worldFXclub]]> Professional FOREX-Trading with managed accounts.

Let the professionals work and share the profit.

Become an investor: worldFXclub

]]> http://forexsb.com/forum/user/1727/ 2010-03-07T13:20:53Z http://forexsb.com/forum/topic/1421/worldfxclub/new/posts/ <![CDATA[data horizon in the newest FSB build]]> Got a question about data horizon, a few versions back when I set data horizon it included the date in the first box "remove data older than", with the newest build it excludes it, but it's not logical, isn't it. It should remove data which is older than given date, therefore keeping the data which is the selected date and newer.

]]> http://forexsb.com/forum/user/1242/ 2010-03-06T19:39:48Z http://forexsb.com/forum/topic/1419/data-horizon-in-the-newest-fsb-build/new/posts/ <![CDATA[Indicator shifting building strategy building]]> I would like to know how to set the bar for an indicator to be based upon. IE I am building a strategy base upon the Aligator indicator. Back three bars I want the lips to be below the theeth and on the second bar bact to have the lips above the teeth and on the current bar for the lips to be above the jaw. This is an example. What I am trying to do is set up an entry point base upon the actoins of an indicator in certain time frames. Also to do this in reverse so I can have an exit strategy also.

Thanks,

]]> http://forexsb.com/forum/user/1726/ 2010-03-06T17:09:10Z http://forexsb.com/forum/topic/1420/indicator-shifting-building-strategy-building/new/posts/